|
|
Step 1
|
|
|
|
|
|
Cut the old ( or remove your old battery connector Black First ) terminal cable and strip the casing for a length of about 20 mm or 3/4 inch 0.750 ths
|
|
|
|
|
Step 2
|
|
|
Insert the stripped cable in place and tighten securing the cable to the mounting plate . Use a 10 mm wrench to tighten the 2 bolts . Make sure you don’t over tight the 2 bolt
|
|
|
|
|
|
|
Step 3
|
|
|
Place the correct EasyclicKSystem over the correct battery post in the unlock position ( Black Negative last ) , with a simple down pressure . Note the Arrow shows the location of the stamp for a easy recognition in case is needed (+ Positive Red ) ( - Negative Black )
|
|
|
|
|
|
Place the correct Easyclick System over the correct battery post in the unlock position , with a simple down pressure Left photo show Black Negative
|
|
|
|
|
Place the correct EasyclicK System over the correct battery post in the unlock position , with a simple down pressure Right photo show Red Positive
|
|
|
|
|
|
|
Left photo show Positive (+) & Negative (-) EasyclicKSystem connectors not clamped
|
|
|
|
|
With a simple down pressure the Easy clicK System will lock and securely clamp around you battery post of your vehicle
|
|
|
|
|
|
Jump Start By Removing the connector cover
|
Using Booster Cables
|
|
EasyclickSystem has been specifically designed to enable the connection of all types of Booster Cables or Jumping Cables . Just take the covers off and attach the cables to the EasyclickSystem connectors.
“ Is just that easy “
|
|
|

|
Best Position to install and remove the EasyclickSystem Cover .
“ Is just that easy “
|
|
|
|
|
This is how the connector will look before the Booster cable will be connected Note that the covers are off they will need to be off
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Technical
|
Specifications
|
|

|

|
|
|
|
|
Note : Alfa Direct International or Ebienne SNC are not responsible by your negligence or careless when installing the EasyclicKsystem
|
|
|
|
|
|
|
All the EasyclicKsystem Logo, Emblems Trade Mark,Patented
|
|
|
are Owned and Register to Ebienne SNC
|